Shear modulus
From Wikipedia, the free encyclopedia
In materials science, shear modulus, G, or sometimes S or μ, sometimes referred to as the modulus of rigidity, is defined as the ratio of shear stress to the shear strain:[1]
| Material | Typical values for shear modulus (GPa) (at room temperature)[2] |
|---|---|
| Steel | 79.3 |
| Copper | 63.4 |
| Titanium | 41.4 |
| Glass | 26.2 |
| Aluminium | 25.5 |
| Polyethylene | 0.117 |
| Rubber | 0.0003 |
- <math>G \ \stackrel{\mathrm{def}}{=}\ \frac{F/A}{\Delta x/h} = \frac{F h}{\Delta x A}</math>
where
- <math>F/A</math> = shear stress;
- force <math>F</math> acts on area <math>A</math>;
- <math>\Delta x/h</math> = shear strain;
- with initial length <math>h</math> and transverse displacement <math>\Delta x</math>.
Shear modulus is usually measured in GPa (gigapascals) or ksi (thousands of pounds per square inch).
[edit] Explanation
The shear modulus is one of several quantities for measuring the strength of materials. All of them arise in the generalized Hooke's law. Young's modulus describes the material's response to linear strain (like pulling on the ends of a wire), the bulk modulus describes the material's response to uniform pressure, and the shear modulus describes the material's response to shearing strains. Anisotropic materials such as wood and paper exhibit differing material response to stress or strain when tested in different directions.
The shear modulus is concerned with the deformation of a solid when it experiences a force parallel to one of its surfaces while its opposite face experiences an opposing force (such as friction). In the case of an object that's shaped like a rectangular prism, it will deform into a parallelepiped.
In solids, there are two kinds of sound waves, pressure waves and shear waves. The speed of sound for shear waves is controlled by the shear modulus.
[edit] See also
[edit] References
- ^ International Union of Pure and Applied Chemistry. "shear modulus, G". Compendium of Chemical Terminology Internet edition.
- ^ Crandall, Dahl, Lardner (1959). An Introduction to the Mechanics of Solids. McGraw-Hill.
- ^ Shear modulus calculation of glasses
| Elastic moduli for homogeneous isotropic materials | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Bulk modulus (<math>K</math>) | Young's modulus (<math>E</math>) | Lamé's first parameter (<math>\lambda</math>) | Shear modulus (<math>\mu</math>) | Poisson's ratio (<math>\nu</math>) | P-wave modulus (<math>M</math>) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
es:Módulo de elasticidad transversal ko:전단 탄성 계수 it:Modulo di taglio he:מודול הגזירה nl:Schuifmodulus ja:剛性率 pt:Módulo de cisalhamento sl:Strižni modul sv:Skjuvmodul th:โมดูลัสของแรงเฉือน uk:Модуль зсуву zh:剪切模量

