Forklift truck

From Wikipedia, the free encyclopedia

(Redirected from Forklift)
Jump to: navigation, search
"Pallet truck" redirects here. For the smaller pallet-moving tool sometimes called a pallet truck, see pallet jack.
This article or section needs to be wikified to meet Wikipedia's quality standards.
Please help improve this article with relevant internal links. (March 2007)
Image:Airforce forklift.jpg
US airman operates forklift at a truck
Image:PeopleForklift.jpg
A forklift driver in training

A forklift truck, a lift truck, a High/Low or a forklift and sideloader is a powered industrial truck used to lift and transport materials, normally by means of steel forks inserted under the load. Forklifts are most commonly used to move loads stored on pallets. The forklift was developed in the 1920s by various companies including the transmission manufacturing company Clark (today known as Clark Material Handling Company) and the hoist company Yale & Towne Manufacturing (today known as Yale Materials Handling Corporation)[1]. It has since become an indispensable piece of equipment in manufacturing and warehousing operations.

Contents

[edit] Design types

There are many national and/or continental associations related to the industrial trucks. The three major ones are the Industrial Truck Association (North America), the Fédération Européenne de la Manutention (Europe), and the Japan Industrial Vehicles Association (Japan). There are many significant contacts among them and they have established joint statistical and engineering programs. One program is the WITS (World Industrial Trucks Statistics) published every month to the association memberships. The statistics are separated by area (continent), country, and class of machine. While the statistics are generic, and do not count production from most of the smaller manufacturers, the information is significant for its depth. These contacts have brought to a common definition of the Class System, which all the major manufacturers adhere to. Following is the list of the more common truck types, from the smallest to the biggest:

Image:Forklift classes.JPG
  • Hand pallet truck (a "pump truck", or a "chep truck", or a "hand-jack", a simple mechanism whereby hand-pumped hydraulics raise or lower a single pallet simply to provide clearance from the floor for manual (hand) pulling; heavy loads are unwieldy or risk injury to operators.) (Separate article to follow with photographs.)
  • Walkie low lift truck (powered pallet truck, usually electrically powered)
  • Rider low lift truck
  • Towing tractor
  • Walkie stacker
  • Rider stacker
  • Reach truck (small forklift, designed for small aisles, usually electrically powered)
  • Electric counterbalanced truck
  • IC counterbalanced truck
  • Sideloader
  • Telescopic handler
  • Slip Sheet machine
  • Walkie Order Picking truck
  • Rider Order Picking truck (commonly called an "Order Picker"; like a small forklift, except the operator rides up to the load and transfers it article by article)
  • Articulated Very Narrow Aisle Counterbalanced trucks (commonly called "Flexi Truck")
  • Guided Very Narrow Aisle truck - 'Man Down' (a type of reach truck designed for aisles less than five feet wide) and 'Man Riser' Combination Order Picker/ Stacker truck

[edit] Characteristics

Image:Forkliftlog.jpg
Diesel Electric Forklift handling logs

A typical 'Counterbalance' forklift may be generally described as follows:

  • The truck proper, which is a motive machine with wheels and/or tracks powered through a drive train.
  • A liquefied petroleum gas–, petrol- or diesel fueled internal combustion engine, or an electric motor(s) either direct current or alternating current powered by either a battery or fuel cells.
  • The mast, which is the vertical assembly that does the work of raising, lowering, and tilting the load; the mast is either hydraulically operated consisting of one or more cylinder(s) and interlocking rails for lifting and lowering operations and for lateral stability, or it may be chain operated with a hydraulic motor providing motive power.
  • The carriage, which comprises flat metal plate(s) and is moved along the mast either by means of chains, or by being directly attached to the hydraulic cylinder.
  • One or more forks, which are the L-shaped members that engage the load. The back vertical portion of the fork attaches to the carriage most often by means of a hook or latch (Class I to IV forks), while some forks use a shaft mount. The front horizontal portion (which is usually tapered for ease of insertion) is inserted into or under the load, usually on a pallet (also known as a "skid"). Alternatively, a variety of other equipment is available, including slipsheet clamps, carton clamps, carpet rams, pole handlers, container handlers, roll clamps and others.
  • A load back rest is fitted when the load is higher than the top of the carriage, and is a rack-like extension either bolted or welded to the carriage to prevent the load from shifting backward.
  • Rider operated machines have a driver's overhead guard, which is a metal roof, supported by posts, that helps protect the operator from any falling objects.
  • The cab, which may contain a seat for the operator, along with the control pedals, steering wheel, levers, and switches for controlling the machine and a dashboard containing operator readouts. The cab may be open, or closed, but is bounded by the cage-like overhead guard assembly.
  • Counterbalance machines have a counterweight, which is a heavy iron mass attached to the rear of the machine, necessary to compensate for the load. In an electric forklift, the large lead-acid battery itself may serve as part of the counterweight.

At the other end of the spectrum from the Counterbalance truck are more 'high end' specialist trucks such as:

  • Articulated Counterbalance Trucks

These are, unlike most other lift trucks, front wheel steer, and are a hybrid VNA (Very Narrow Aisle) truck designed to be both able to offload trailers and place the load in narrow aisle racking. Increasingly these trucks are able to compete in terms of pallet storage density, lift heights and pallet throughput with Guided Very Narrow Aisle trucks.

  • Guided Very Narrow Aisle trucks

These are rail or wide guided and available with lift heights up to 12 metres (40') non top-tied and 30 metres (98') top-tied. Two forms are available; 'man-down' and 'man-riser' where the operator elevates with the load for increased visibility or for multilevel 'break bulk' order picking. This type of truck, unlike Articulated Narrow Aisle Trucks, requires a high standard of floor flatness.

[edit] Control and capability

Forklift trucks are available in many variations and load capacities. In a typical warehouse setting most forklifts used have load capacities of around one to five tons, though machines of over 50 tonnes capacity have been built and operated.

Unlike cars, forklifts are normally rear-steer.

In addition to a control to raise and lower the forks (also known as blades or tines), the operator can tilt the mast to compensate for a load's tendency to angle the blades toward the ground and risk slipping off the forks. Tilt also provides a limited ability to operate on non-level ground. Some machines also allow the operator to move the tines and backrest laterally (side-shift), allowing easier placement of a load. To aid the handling of skids that may have become excessively tilted and other specialty material handling needs, some forklifts are fitted with a mechanism that allows the tines to be rotated. In addition, a few machines offer a hydraulic control to move the tines together or apart, removing the need for the operator to get out of the cab to manually adjust for a differently sized load.

Roll and barrel clamp attachments for handling barrels, kegs, or paper rolls also have a control to operate the clamp pads that grab the load, such attachments also usually have a rotate function so that a vertically stored paper roll can be inserted into the horizontal intake of a printing press.

In some locations (such as carpet warehouses) a long metal pole is used instead of forks to lift large rolls. Similar devices, though much larger are used to pick up 40 tonne metal coils.

Another variation, used in some manufacturing facilities, utilizes forklift trucks with a clamp attachment that the operator can open and close around a load, instead of forks. Products such as cartons, boxes, etc., can be moved with these trucks. The product to be moved is squeezed, lifted, and carried to its destination. These are generally referred to as "clamp trucks".

Skilled forklift operators annually compete in obstacle and timed challenges at regional forklift rodeos.

[edit] Forklift safety

[edit] Standards

Forklift safety is subject to a variety of standards world wide. The most important standard is the ANSI B56—of which stewardship has now been passed from the American National Standards Institute (ANSI) to the Industrial Truck Standards Development Foundation after multi-year negotiations. ITSDF is a non-profit organization whose only purpose is the promulgation and modernization of the B56 standard.

Other standards have been promulgatd by the U.S Occupational Safety and Health Administration and the United Kingdom's Health and Safety Executive. Lift truck operators must be trained and certified.

Image:Plaque-de-charge-Chariot.jpg
Load capacity chart
‎

[edit] General

Forklifts are rated for loads at a specified maximum weight and a specified forward centre of gravity. This information is located on a nameplate provided by the manufacturer, and loads must not exceed these specifications. In many jurisdictions it is illegal to remove or tamper with the nameplate, without the permission of the forklift manufacturer.

An important aspect of forklift operation is that many have rear-wheel steering. While this increases maneuverability in tight cornering situations, it differs from a driver’s traditional experience with other wheeled vehicles as there is no caster action; it is unnecessary to apply steering force to maintain a constant rate of turn.

Another critical characteristic of the forklift is its instability; the forklift and load must be considered a unit, with a continually varying centre of gravity with every movement of the load. A forklift must never negotiate a turn at speed with a raised load, where centrifugal and gravitational forces may combine to cause a disastrous tip-over accident. The forklift will be designed with a load limit for the forks, which is decreased with fork elevation and undercutting of the load (i.e. load does not butt against the fork "L"). A loading plate for loading reference is usually located on the forklift. A forklift must not be used as a personnel elevator without the fitting of specific safety equipment, such as a "cherry picker" or "cage".

[edit] Today's market

Four companies now dominate the counterbalanced forklift market in terms of worldwide sales.[citation needed] They are:

  1. Toyota Industries Corporation (3.47 M€ in '03/04)[2]
  2. KION Group (2.94 M€ in '03)
  3. Jungheinrich (1.35 M€ in '03)
  4. NACCO Industries, Inc. (NMHG) (1.27 M€ in '03) with Yale and Hyster Brands

[edit] Manufacturers

Image:Manitou forklift 09872.jpg
Old French Manitou forklift in the harbour of Pors-Éven, France

Over 300 brands of forklift have existed. Many have disappeared through acquisitions, others have gone bankrupt, and some shut down. A list of manufacturers currently producing industrial trucks in the USA and UK can be found on the ITA website.

[edit] Notes

  1. ^ Yale (Company) History. Accessed 2 April 2007.
  2. ^ Daily Telegraph article on new "Tonero" Issue 47,326(2nd August, 2007)

[edit] See also


[edit] External links

Image:Commons-logo.svg
Wikimedia Commons has media related to:
Forklifts

[edit] Standards

[edit] Organizations

[edit] Safety Information

[edit] News and History

cs:Vysokozdvižný vozík da:Gaffeltruck de:Kraftbetriebenes Flurförderzeug es:Carretilla elevadora eo:Ĉarelo fr:Chariot élévateur it:Carrello elevatore he:מלגזה hu:Targonca nl:Vorkheftruck ja:フォークリフト no:Gaffeltruck pl:Wózek widłowy pt:Empilhadeira ru:Штабелёр fi:Trukki sv:Truck vi:Xe nâng hạ tr:Forklift uk:Автонавантажувач zh:工业搬运车辆

Retrieved from "http://india.smashits.com/wikipedia/Forklift_truck"
Views
Personal tools

Toolbox