Ductility
From Wikipedia, the free encyclopedia
Wiktionary, the free dictionary.
Ductility is a mechanical property which describes how much plastic deformation a material can sustain before fracture occurs. Examples of highly ductile metals are silver, gold, copper, and aluminum. The ductility of steels varies depending on the alloying constituents. Increasing levels of carbon decreases ductility, i.e., the steel becomes more brittle.
Contents |
[edit] Definition of ductility
Ductility can be quantified by the fracture strain, which is the strain at which a test specimen breaks during a uniaxial tensile test. Another commonly used measure is the reduction of area at fracture.[1]
[edit] Scientific fields
[edit] Geology
In Earth science, the brittle-ductile transition zone is a zone at an approximate depth of 10 km in the Earth, at which rock becomes less likely to fracture, and more likely to deform ductilely. In glacial ice this zone is at approximately 30 metres depth. It is not impossible for material above a brittle-ductile transition zone to deform ductilely, nor for material below to deform brittly. The zone exists because as depth increases, confining pressure increases, and brittle strength increases with confining pressure whilst ductile strength decreases with increasing temperature. The transition zone occurs at the point where brittle strength exceeds ductile strength.
[edit] Materials science
In materials science the ductile-brittle transition temperature (DBTT), nil ductility temperature (NDT), or nil ductility transition temperature of a material represents the point at which the fracture energy passes below a pre-determined point (for steels typically 40 J[2] for a standard Charpy impact test). DBTT is important since once a material is cooled below the DBTT, it has a much greater tendency to shatter on impact instead of bending or deforming. For example, ZAMAK 3, a zinc die casting alloy exhibits good ductility at room temperature but shatters at sub zero temperatures when impacted. DBTT is a very important consideration in materials selection when the material in question is subject to mechanical stresses. See the section on Glass transition temperature for a related discussion.
In some materials this transition is sharper than others. For example, the transition is generally sharper in materials with a body-centered cubic (BCC) lattice than those with a face-centered cubic (FCC) lattice. DBTT can also be influenced by external factors such as neutron radiation which leads to an increase in internal lattice defects and a corresponding decrease in ductility and increase in DBTT.
[edit] Notes on Ductility
- ^ G. Dieter, Mechanical Metallurgy, McGraw-Hill, 1986
- ^ John, Vernon. Introduction to Engineering Materials, 3rd ed.(?) New York: Industrial Press, 1992. ISBN 0831130431.
ar:قابلية السحب bs:Duktilnost ca:Ductilitat de:Duktilität es:Ductilidad eo:Duktileco fa:چکشخواری fr:Ductilité hr:Duktilnost io:Duktila is:Teygjanleiki it:Duttilità nl:Ductiliteit pt:Ductilidade simple:Ductility sl:Duktilnost sv:Duktilitet vi:Độ dẻo zh:延性 pl:Ciągliwość
